EM-Service-Logo-emcowheaton_ir_logo_new
Fuel Systems
EM-Service-Logo-emcowheaton_ir_logo_new
Back to the product list

Boom Top Loaders

EM-En-Product-Photo-boom-top-loadersEM-En-Product-Photo-boom-top-loaders-V1
EM-En-Product-Photo-boom-top-loaders
EM-En-Product-Photo-boom-top-loaders-V1

Boom Loaders are the most versatile of all top loading arms to handle all media and allow for the greatest reach.

They are suitable for the top loading of road or rail tankers where the manhole cannot be accurately positioned. These arms are equipped with an additional swivel joint to ensure the flange connection remains horizontal when coupling to road or railcar tankers.

Boom loaders are most commonly paired with a Vapor Return Hose used for hydrocarbons (e.g. gasoline), toxic, and aggressive media. By loading with a vapor return hose, the product vapor will be recovered through the loading arm. This improves the profitability of the terminal because vaporized product can be recovered and vapor does not pollute the environment. By loading with a sealed manhole, a high level of protection is achieved for both the operator and the environment.

Due to its strong design, this loading arm can be equipped with all required accessories.

Because of the robust and high quality design of the D2000 swivel joints and the precise loading arm balancing, handling of the loading arm is effortless.

contact us
Request a Quote

US

Sizes:

  • 2" - 6"

Materials of Arm Construction:

  • Carbon steel
  • Stainless Steel
  • Low Temp Carbon Steel
  • Aluminum
  • PTFE Lined

Materials of Optional Accessories:

  • D2000 Swivels
  • TODO
  • Lockdown Device
  • Vapor/Splash Plates, SST & Alum, Viton
  • Vapor Cone, SST & Alum, Viton
  • Cone Deflector, SST & Alum
  • Tee Deflector, SST & Alum
  • Heat tracing / Insulation
  • Steam Jacketing
  • Level sensor
  • Parallel Device
  • Position Stops
  • Proximity Switch

ROM:

  • +50° to -10°

Seals:

  • Viton
  • Buna/Nitrile
  • PTFE & Equivalents
  • *More options upon request

Balancing Method:

  • Spring Cylinder
  • Pneumatic

Design Pressure:

  • Based on flanges and accessories
  • Typical - 150 psi
  • *Higher pressure ratings available but cannot exceed 580 PSI

Design Temperature:

  • Based on piping/flanges/seals/accessories
  • Typical Range: 5F to 266 F
  • Broader temperature ranges available

Suggested Applications/Mediums:

  • Splash Loading
  • Multiple compartment tanks
  • Tight seal / vapor recovery
  • Chemical / Acids
  • Sulphur
  • Asphalt
  • Long Reach

EW US Part Number:

  • E2022
  • E2025

Europe

Sizes:

  • DN 50-150

Materials of Arm Construction:

  • Carbon Steel
  • Stainless Steel
  • Low Temp Carbon Steel
  • Aluminum
  • PTFE Lined

Materials of Optional Accessories:

  • D2000 Swivels
  • TODO
  • Lockdown Device
  • Vapor/Splash Plates, SST & Alum, Viton
  • Vapor Cone, SST & Alum, Viton
  • Cone Deflector, SST & Alum
  • Tee Deflector, SST & Alum
  • Heat tracing / Insulation
  • Steam Jacketing
  • Level sensor
  • Parallel Device
  • Position Stops
  • Proximity Switch

ROM:

  • +60° to -45°

Seals:

  • Viton Grade A
  • Buna/Nitrile
  • PTFE & Equivalents
  • FVMQ
  • Fluoroloy-A08
  • Food Grade (FDA conform)
  • *More options upon request

Balancing Method:

  • Spring Cylinder
  • Pneumatic
  • Hydraulic

Design Pressure:

  • Based on flanges and accessories.
  • Typical is PN 10-16
  • *Higher pressure ratings available but cannot exceed 40 barg

Design Temperature:

  • Based on piping/flanges/seals/accessories
  • Typical range: -50C to 250C
  • Broader temperature ranges available

Suggested Applications/Mediums:

  • Splash Loading
  • Multiple compartment tanks
  • Tight seal / vapor recovery
  • Chemical / Acids / Lye
  • Sulphur
  • Asphalt / Bitumen
  • Long Reach
  • Mineral Oil
  • Gasoline / Diesel
  • Liquid Foods (Beer, Whiskey, Chocolate)

EW Germany Part Number:

  • E2630